HUAWEI HUAWEI P8max Smart Camera Self-Changed Camera

Symptom: The rear camera is unable to focus Turn on the camera with endless focus Focus Blur

Lesion: Rear camera

Solution: Replace the rear camera module

Operation date: April 27, 2017

Tools: hot melt glue guns, small Phillips screwdrivers for dismantling, small hex screwdrivers, suction cups, blades, tweezers (nails), hot air guns (hair dryers or big suns, time issues).

First to an exploded view

The hot melt adhesive first hits one end of the black protective strip, after solidification it is inserted by hand to slowly insert the blade and expose 4 screws. (The operation did not shoot, borrow a network "removal mad" map, here are the small hexagonal screws, since the beginning of the fuselage are small cross screws), the Internet also has a direct 3M double-sided tape, the blade cut open, method Many, careful to start.

Decompose the screen and motherboard connection, find the lesion, the camera section in the upper right corner. (At a glance after unpacking, use the suction cup to pull up from the side that does not have a button and then slowly open it.)

Slowly lift up, here there are two pads are fixed with screws, one by one, you can expose the camera plug.

Here's a note that some gray tape is firm and can be hung slowly with a tweezers.

Contrast between old and new cameras (accessories source: XBao, p8, p8max, Maiman 4 universal)

Reverse installation testing, perfect.