What effect does the camera power failure have on the camera?

As the public's public safety and security awareness gradually increased. It also puts forward higher requirements for security technology products, and also shows a broad space for video surveillance security products. The video surveillance system has become the main means of modern city management, detection and control because of its ability to image and truly reflect the characteristics of being monitored. However, if you want the camera to start up, you need the camera power. Any electronic product can't be separated from the power supply, so what happens to the camera if the camera power supply is faulty?

The first is the power interference camera. Because it is subject to external interference during the transmission of the camera power supply cable, just like the effects of lightning and AC voltage. If this happens, the camera will have a great impact on the camera. Therefore, when installing the camera power cable, the camera power cable should not be too close to the AC cable.

The problem of insufficient power supply to the camera will also affect the camera. The problem with the camera is that the infrared field of view blur appears. That is to say, the camera is normal during the day and the vision will be blurred at night. If you observe it, you will find infrared. The brightness of the light board is not high, why is the power supply insufficient? That's because the daylight is sufficient and the camera lens captures enough natural light for the CCD sensor to image, while the infrared is off. Because the infrared light board is relatively power-hungry, it will increase the power supply overhead when the infrared light is turned on at night, which will cause the camera to have insufficient power supply.

The above is the impact on the camera when the camera power supply fails, but most of the problems are the problem of insufficient power supply to the camera. In fact, this problem is well solved. Just calculate the power of the camera with a total of power before the camera is installed. After the installation is completed, the power supply of the camera will not be insufficient, and it will not be caused by insufficient power supply of the camera. Causes power to the camera and damage to the camera.